WEG VARIABLE FREQUENCY DRIVE CFW700A16P0T2DBN1 FOR 5HP MOTOR 200-240V

Description

WEG VARIABLE FREQUENCY DRIVE CFW700A16P0T2DBN1 FOR 5HP MOTOR 200-240V new in the box and will be shipped out next business day after cleared payment. It was listed as an Open box because box was open for inspection and photos. Otherwise it is new and sealed. Refer to the photos.
Adjustable-frequency drive is designed for variable-torque applications like pumps or fans. Features a PID controller that can be programmed in engineering units. The integrated power supply can be used with external transducers to measure flow and pressure. Keypad start-up guide makes installation easy. Dual DC bus chokes reduce harmonics and allow longer VFD lifetime.
Item
Variable Frequency Drive
Max. HP
5 hp
Enclosure
NEMA 1
Input Voltage
240V AC
Max. Output Amps
16 A
Output Voltage
240V AC
Input Phase AC
3
Output Phase AC
3
With Bypass / No Bypass
No Bypass
With Line Contactor / No Line Contactor
No Line Contactor
Starting Torque
100%
Torque @ 1 Hz
100 %
Input Frequency
50/60 Hz
Output Frequency Range
0 to 300 Hz
Adjustable Acceleration Time
0 to 999 sec
Adjustable Deceleration Time
0 to 999 sec
Dynamic Braking
Yes
Height
12.04 in
Width
5.71 in
Depth
8.94 in
Control Type
Keypad/Remote
Key Pad Lockout
Yes
Start/Stop Control
Programmable
Protection
Overcurrent/Short Circuit, Under/Overvoltage, Phase Loss, VFD Overload, Motor Overload, Braking Resistor Overload, IGBTs Overload, Phase-to Ground Short Circuit at the Output, Motor Over speed
Control Method
Linear and Adjustable V/Hz, Voltage Vector, Sensor less Vector, and Closed Loop Vector
Accepts Input Control Signal
Yes
Display Type
LCD
Displays
LCD
Digital Readout
Yes
For Use With
3-Phase Induction Motor
Standards
UL, cUL, CE
Thanks for looking.