Verification Experts/VeEX VePAL CX120+ CATV Cable Signal Analyzer w/USG FEC+

Description

Verification Experts/VeEX VePAL CX120+ CATV Signal Analyzer with the USG FEC Option
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from Verification Experts and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit ships guaranteed to work for 30-days, parts and labor, excluding freight.
The Unit's Serial Number Tag Reads:
Model Number:
CX120+
Serial Number:
VCAA04OA610582
Software Version:
T-SLM-Release-5.0.91
Options Installed:
001 - Web Browser
002 - IP Tools
Advanced IP
USG with FEC
Description:
Equipped with the same base feature set as the CX100+, the CX120+ boasts the industry's first Upstream Signal Generator with FEC capabilities as an option. This unique feature is used to characterize the HFC return path for CW, QPSK, QAM16, QAM64, or QAM128 tranwsmission while QAM analysis is made possible when the unit is used in conjuction with the CX180+ handheld, CX180R headend monitoring solution, CX350, or CX380.
Measurements Specifications:
Frequency Range:
5 to 1000 MHz
Level Input Range:
-40 dBmV to +55 dBmV
Level Accuracy:
±1.5 dB typical
Amplitude Resolution:
0.1 dB
Downstream Modulation:
64/256 QAM Annex A/B/C
Digital Lock Range
2
:
-15 dBmV to +50 dBmV
C/N Accuracy:
±2.0 dB typical
MER:
21 to 40 dB (±1.5 dB typical)
Downstream BER Range:
1 x 10
-9
to 9 x 10
-3
Input Impedance:
75 Ω
Single Channel Measurements Specifications:
Analog Signal Measurements:
Video and audio Power level, Video-to-audio ratio, adjacent channel ratio, C/N ratios
Digital Signal Measurements:
QAM power level, MER, Pre/Post BER, constellation, deep interleave, adjacent channel ratio
Installation Check Specifications:
Measurement Locations:
Tap, Ground Block, Set-Top Box
Analog Measurements:
Up to 12 channels per channel table (including tilt, peak-to-valley, min/max video level, min/max video-to-audio ratio, min/max C/N ratio, max adjacent channel ratio
Digital Measurements:
Up to 12 channels per chanel table (including tilt, peak-to-valley, min/max QAM level, max adjacent channel ratio
System Scan Specifications:
General:
Scan on all channels in the active channel plan
Analog Measurements:
Video and audio power levels, video-to-audio ratio, adjacent channel ratio, C/N ratio, tilt, peak-to-valley, min/max video level, min/max video-to-audio ratio, min/max C/N ratio, max adjacement ratio
Digital Measurements:
QAM power level, adjacent channel ratio, tilt, peak-to-valley values, min/max QAM level, max adjacent channel ratio
Forward and Reverse Path Ingress Scan Specifications:
Forward:
Scan Range:
54/108 MHz
1
to 1000 MHz
Resolution:
minimum 250 kHz
Reverse:
Scan Range:
5 to 42 MHz/65 MHz
1
Resolution:
minimum 250 kHz
Forward and Reverse:
Resolution Bandwidth:
250 kHz
Attenuation Range:
0 to 50 dB, 10 dB/step
Range with Attenuation:
-40 dBmV to +55 dBmV
Dynamic Range:
45 dB
Upstream Signal Generator Specificatiosn:
Modulation:
QPSK, QAM 16/64/256, CW
Output Signal Level:
5 to 58 dBmV (CW typical)
Frequency Range:
4 to 42 MHz/65 MHz
1
, 1 MHz step
Option:
QAM 16/64/256 modulation with continuous FEC
Advanced IP Testing Specifications:
Tests:
Ping, Trace Rout, ARP, FTP/Web tests. These are done via the chassis 10/10-T port
Notes:
1:
Annex A
2:
Typical range with QAM-64 modulation
General Specifications:
Size:
8.25" H x 3.75" W x 2.25" D (210 mm x 100 mm x 55 mm)
Weight:
Less than 2 lb (1 kg)
Battery:
Lithium Ion smart battery, 2600 mAh, 10.8 VDC
Operating Time:
> 4 hours, Standby > 12 hours
Operating Temperature:
-10°C to 45°C (14°F to 113°F)
Storage Temperature:
-20°C to 70°C (-4°F to 158°F)
Humidity:
5% to 95% non-condensing
Display:
3.5" QVGA 320 x 240 full color touch-screen
Ruggedness:
Survives 2 m (6 ft) drop to concrete on all sides
Water Resistance:
May be used in light rain
Interfaces:
USB 2.0 Host and Client, RJ45 10/100-T Ethernet
Languages:
Multiple languages can be supported
Power Up Time:
Less than 20 seconds
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
02/23/19