Truck Bed Coating Liner Stops Rust Resistant Black Coat Protect No Scratch 32 Oz

Description

Truck Bed Coating Liner Stops Rust Resistant Black Coat Protect No Scratch 32 Oz
Item detailed information:
Flash point: 31.0 degrees_celsius
Prevents truck bed damage caused by scratches, rust and weather, while also enhancing your vehicle's appearance.
Textured finish that forms to the contours of a truck bed
Stops Rust formula
Able to be rolled on or brushed on
Also ideal for running boards, bedrails and more
Aerosol
Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.
Brush-On
Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.
Clear Coat
Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.
Proper Preparation for Better Results
Sand down gloss surfaces and remove loose paint
wash surface to remove dirt and debris to ensure proper adhesion
mask off areas to protect
apply in 2 to 3 light coats for best coverage and protection
Remove Paint and Rust
Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.
Thoroughly Clean Surface
Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.
Mask Off Areas
Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.
Apply Paint
Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.
Free Shipping: within the 48 U.S. states
Shipment only to the lower 48 states. We do NOT ship to PO Boxes
Returns:
We offer a 30 day return policy from the receiving date.
All items purchased must be returned in the same condition as they were delivered in.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.