Telemecanique Altistart 48 ATS48D38YU 30HP

Description

This is a Telemecanique Altistart 48 Soft Starter that gently used, excellent condition, like brand new!! This has been tested and tried with no faults, failures, or errors. The piece of equipment that this was used for was an industrial  hydraulic ram cylinder powered by line voltage 480v w/120v controls. Soft Starter was situated in a dry, cool environment MCC room. It also was placed in its own sealed enclosure besides the 480v panel. Was only used temporarily for less than 4 months before equipment was relocated. This is a great deal!! Those of you whomever have worked on, with, or installed these Schneider Telemecanique Soft Starts know that these are top notch in the industrial world.
Telemecanique Altistart 48 ATS48D38YU 30HP
Range of Product:
Altistart 48
Product or Component Type:
Soft starter
Product Destination:
Asynchronous Motors
Product Specific Application:
Heavy Duty Industry and Pumps
Device Short Name:
ATS48
Power Supply Voltage:
208...690 V - 15...10 %
Motor power kW:
15 kW at 400 V for severe applications
15 kW at 440 V for severe applications
22 kW at 500 V for standard applications
22 kW at 525 V for standard applications
22 kW at 660 V for severe applications
22 kW at 690 V for severe applications
30 kW at 660 V for standard applications
30 kW at 690 V for standard applications
9 kW at 230 V for standard applications
7.5 kW at 230 V for severe application
18.5 kW at 400 V for standard applications
18.5 kW at 440 V for standard applications
18.5 kW at 500 V for severe applications
18.5 kW at 525 V for severe applications
Motor Power hp:
10 hp at 208 V for standard applications
10 hp at 230 V for severe applications
20 hp at 460 V for severe applications
25 hp at 460 V for standard applications
25 hp at 575 V for severe applications
30 hp at 575 V for standard applications
7.5 hp at 208 V for severe applications
Power dissipation in W:
116 W for standard applications
99 W for standard applications
Utilisation category:
AC-53A
Type of Start:
Start with torque control (current limited to 5 In)
Icl nominal current:
38 A for connection in the motor supply line for severe applications
38 A for connection in the motor supply line for standard applications
Product certifications:
CCC
CSA
TCF
UL
GOST
NOM 117
C-Tick
SEPRO
DNV
Assembly style:
With heat sink
Function available:
External bypass (optional)
Power Supply Frequency
50...60 Hz - 5...5 %
Power supply frequency limits:
47.5...63 Hz
Device Connection:
In the motor supply line
Discrete output number:
2
Discrete output type:
(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Output Absolute Accuracy Precision:
+/-5
%
Minimum Switching Current:
10 mA at 6 V DC for relay outputs
Maximum Switching Current:
Logic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC
inductive load, cos phi = 0.5 20 ms
Relay outputs 1.8 A at 30 V DC
inductive load, cos phi = 0.5 20 ms
Discrete Input Number:
5
Discrete Input Type:
PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Discrete Input Voltage:
24 V <= 30 V
Discrete Input Logic:
Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Starting Current:
0.4...1.3 Icl adjustable
Analogue Output Type:
Current Output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
Modbus Connector:
Type1 RJ45
Communication Data Link:
Serial
Physical Interface:
RS485 multidrop
Transmission Rate:
4800, 9600 or 19200 bps
Max nodes number:
31
Protection type:
Phase failure: line
Thermal protection: motor
Thermal protection: starter
Marking:
CE
Operating Position:
Vertical+/-10degree
Height:
275 mm
Width:
160 mm
Depth:
190 mm
Net Weight:
4.9 kg
Motor Power Range AC-37:
7...11 kW at 200…240 V 3 phases
15…25 kW at 380…440 V 3 phases
15…25 kW at 480…500 V 3 phases
Motor Starter Type:
Soft Starter
Ambient Air Temperature for Operation:
40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)
Ambient Air Temperature for Storage:
-25…70 °C