Schneider Electric (Telemecanique) ATSU01N209LT

Description

New soft starters.
Price for
1 piece
in box.
Selling as is.
Schneider Electric
Altistart U01
ATSU01N209LT
Soft starter for asynchronous motor - ATSU01 - 9 A - 200..480V - 1.5..4 KW
Main
Range of product
Altistart U01 and TeSys U
Product or component type
Soft starter
Product destination
Asynchronous motors
Product specific application
Simple machine
Device short name
ATSU01
Network number of phases
3 phases
[Us] rated supply voltage
200...480 V - 10...10 %
Motor power kW
4 kW, 3 phases at 400 V
1.5 kW, 3 phases at 230 V
Motor power hp
2 hp, 3 phases at 230 V
5 hp, 3 phases at 460 V
IcL starter rating
9 A
Utilisation category
AC-53B conforming to EN/IEC 60947-4-2
Current consumption
65 mA
Type of start
Start with voltage ramp
Power dissipation in W
1.5 W at full load and at end of starting
91.5 W in transient state
Complementary
Assembly style
With heat sink
Function available
Integrated bypass
Supply voltage limits
180…528 V
Supply frequency
50...60 Hz - 5...5 %
Network frequency
47.5...63 Hz
Output voltage
<= power supply voltage
[Uc] control circuit voltage
24 V DC +/- 10 %
Starting time
1 s / 100
5 s / 20
10 s / 10
Adjustable from 1 to 10 s
Deceleration time symb
Adjustable from 1 to 10 s
Starting torque
30...80 % of starting torque of motor connected directly on the line supply
Discrete input type
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage
24...40 V
Input output isolation
Galvanic between power and control
Discrete input logic
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
Discrete output current
2 A DC-13
3 A AC-15
Discrete output type
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
Discrete output voltage
24 V (voltage limits: 6...30 V) open collector logic
Minimum switching current
10 mA at 6 V DC for relay outputs
Maximum switching current
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load
Maximum switching voltage
440 V relay outputs
Display type
1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
Tightening torque
1.9…2.5 N.m
0.5 N.m
Electrical connection
4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Marking
CE
Operating position
Vertical +/- 10 degree
Height
234 mm
Width
45 mm
Depth
150 mm
Product weight
0.34 kg
Motor power range AC-3
1.1…2 kW at 200…240 V 3 phases
2.2…3 kW at 380…440 V 3 phases
4…6 kW
Motor starter type
Soft starter
Environment
Electromagnetic compatibility
Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Conducted and radiated emissions level 3 conforming to IEC 61000-4-6
Immunity to conducted interference caused by radio-electrical fields conforming to IEC 61000-4-11
Standards
EN/IEC 60947-4-2
Product certifications
CCC
UL
C-Tick
CSA
IP degree of protection
IP20
Pollution degree
2 conforming to EN/IEC 60947-4-2
Vibration resistance
1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity
5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation
-10…40 °C (without)
40…50 °C (with current derating of 2 % per °C)
Ambient air temperature for storage
-25…70 °C conforming to EN/IEC 60947-4-2
Operating altitude
<= 1000 m without
> 1000 m with current derating of 2.2 % per additional 100 m