-40%

LCD NanoVNA-F VNA SWR Meter VHF UHF Antenna Analyzer Vector Network Analyzer

$ 68.63

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Condition: New
  • Brand: Unbranded
  • Country/Region of Manufacture: China
  • Return shipping will be paid by: Seller
  • MPN: Does Not Apply
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    the original author of NanoVNA-F
    .
    NanoVNA-F "Handheld Vector Network Analyzer"
    is
    a product based on the Open Source Project of NanoVNA
    (
    https://ttrf.tk/kit/nanovna/
    )
    .
    Thanks to hugen's creative idea of use the harmonic of Si5351
    , We build NanoVNA-F and expand the measure frequency up to 1GHz, which S11 still have 40dB dynamic range At 1GHz.
    Your can
    ask any questions about NanoVNA-F
    at:
    https://groups.io/g/nanovna-f
    Or watch the Video:
    https://youtu.be/LwgF8JfZZaQ
    NanoVNA-F hardware features include and are not limited to the following improvements:
    1.
    Use 4.3-inch IPS TFT LCD &
    resistive touch screen
    , with a larger view angle and can be seen clearly in strong outdoor light.
    2. Switch to large capacity
    5000mAh/3.7V lithium battery
    (The battery is an optional accessory, some
    International express
    cannot transport the battery, we also provide a battery holder, you can use the common mobile phone battery as an alternative, which size limit < L(90mm)*W(54mm)*H(5.6mm)),
    standby time is longer, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used.
    3. The Lipo Charing IC to changed to IP5306(with 2A
    high charing current)
    , make the charging time shorter.
    4. Use a larger and better operating level.
    5. Use a larger and better operating Power Switch.
    6. Support Chinese and English menu switching;
    7. Upgrade the user program by virtual U disk(16MB SPI Flash Memory Inside).
    8. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
    9. Firmware are fully open source at
    github.com/flyoob/NanoVNA-F
    please star me ~~~
    ...
    NanoVNA-F hardware block diagram:
    The NanoVNA-F measurement range is 50k-1GHz. Use the harmonic of the clock chip SI5351 the
    measure
    frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic range of 40dB (the standing wave ratio is less than 1.02). The RF front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range.
    Basic performance:
    ● Size: 14CM * 7.5CM * 2CM (length, width and height)
    ● Measurement frequency: 50kHz ~ 1000MHz
    ● RF output: -13dbm (maximum -9dbm)
    ● Frequency accuracy: < 0.5ppm
    ● Port SWR: < 1.1

    Display: 4.3 inch IPS TFT (800x480)
    ● USB interface: USB Type-C communication mode: CDC (serial)
    ● Power consumption: USB 5V 200mA, built-in 5000mAh/3.7V battery, theoretical battery life 18 hours, maximum charging current 2A
    ● Output capacity: 5V/1A, support for Android, Apple mobile phone
    ● Number of calibration points: 101
    ● Number of scanning points: 101
    ● Display Tracking: 4, Marking: 4, Setting Save: 5
    ● Scanning time: about 1.9s/1 times (50kHz ~ 1000MHz full frequency band)
    Can measure S parameters, voltage standing wave ratio SWR, phase map, group delay, Smith chart...
    Original 19.0Wh (about 5000mAh/3.7V after conversion) large capacity lithium battery
    Designing a metal shield for the RF front end, allowing the S21 to have a dynamic range better than 60dB over the full frequency range.
    Power Bank function 5V/1A, support for Android, Apple mobile phone
    Open Coaxial cable length measure:
    1, NanoVNA-F S11 parameters, SWR standing wave ratio measure:
    WOUXUN UV9D-Plus antenna UHF standing wave ratio measurement, starting frequency: 300M, stop frequency: 600M, the green curve in the figure below is the standing wave ratio, the lowest frequency of the standing wave is at 444.000000MHz, SWR=1.03.
    WOUXUN
    UV9D-Plus antenna interface is an SMA standard male (internal screw) that can be directly connected to the instrument or connected via the included SMA elbow for easy testing.
    Baofeng UV-5R VHF antenna VSWR measurement, the antenna interface is SMA standard female, can be connected to the instrument through the attached SMA-JJ adapter. The lowest point of the standing wave is 134.200000MHz, SWR=1.68.
    2, S21 insertion loss measurement, low pass, high pass, band pass filter measurement
    Measuring 6.5M Ceramic Notch with NanoVNA-F
    Measuring 10.7M ceramic filter using NanoVNA-F
    A self-made low-pass filter was measured using the NanoVNA-F with a 3dB bandwidth of approximately 400MHz.
    3, performance indicators comparison,
    Keysight E5071C four-port vVector network analyzer vs NanoVNA-F
    R433 Surface-Acoustic-Wave Resonator Measurement Comparison,
    Right click to open the original picture.
    The actual frequency response curve in the
    Surface-Acoustic-Wave Resonator
    data sheet:
    The real measurement result of NanoVNA-F, the blue curve is S21, and the transmission measurement (insertion loss).
    LoRa
    U Band duplexer
    measure comparison
    , RX: 480M TX: 505M Keysight E5071C four-port network
    LoRa U Band duplexer measure comparison
    , RX: 480M TX: 505M NanoVNA-F
    S11 U Band duplexer data comparison, E5071C(501 points) vs NanoVNA-F(1
    01 points
    ), import to Matlab.
    NanoVNA-F 's
    Data is interpolated.
    S21 U Band duplexer data comparison,
    E5071C(501 points) vs NanoVNA-F(1
    01 points
    )
    , import to Matlab.
    NanoVNA-F 's
    Data is interpolated.
    It can be seen that after calibration, NanoVNA-F can get good measurement results.
    4、Package list
    ● NanoVNA-F x1
    ● SMA-JJ RG316 cable 20CM x2 (
    NanoVNA-F is a standard SMA female connector, external screw inner hole, use this cable to switch to M head, N head to better protect SMA female
    )
    ● 1 set of calibration parts (
    50Ω standard load x1, sma open x1, sma short x1, use the included calibration piece, the instrument can be calibrated to get good measurement result data, the instrument has been fully frequency-calibrated before shipment and Store the data in parameter 0. If you change the measurement conditions, such as adding a patch cord and modifying the frequency range, you may need to recalibrate and store the parameters in 0-4. All parameters can be called up by the “recall” function.
    )
    ● SMA-JJ double needle x1
    ● SMA elbow, external screw inner hole to inner screw inner needle x1
    ● Type-C data cable x1
    ● NanoVNA-F Quick Start Guide x1(English)
    At the same time, To
    Protect your device
    a set of packing boxes with EPE protection equipment and parts is included.
    5. About PC control software
    After Firmware v0.0.3, NanoVNA-F support PC control softwares build for NanoVNA.
    NanoVNASharp v1.0.3(by Hugen)
    nanoVNA_mod_v2(by alex_m)
    nanovna-saver(by Rune B. Broberg)
    For more info,
    visit
    https://github.com/flyoob/NanoVNA-F
    6. NanoVNA-F Menu Structure Quick start guide
    Shipping
    Item will be shipped out within 2 business days after receipt of your payment, we ship the item through hongkong Air mail or China Post.          We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time .
    Before buying, Please make sure your address is correct. Or not, please correct it before payment
    Ship to worldwide from Hong Kong within 12-24 hours after payment completed received, and will give you the tracking number asap. sometimes we will send it by flat post air mail if just one low price order.Hope you understand.
    we advise shipping by DHL or EMS,and we have gave a discount for you,you can received it in 4-9 business days.
    it takes about 15-30days usually if shipping by CHina/Hong Kong post air mail
    Payment
    We ONLY accept payment by Paypal.
    All payments must be received within 7 working days after auction has ended. Non-paying bidders will be reported to ebay.
    Feedback
    If you have any questions or comments about our products or policies, please contact us by emails with your purchased item number.
    You also can contact us by leaving us an eBay message,we will be responded within 24hours.
    Customer satisfactory is most important to us. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback.
    Negative feedback does not solve anything. We are always willing to work things out, thank you!
    Return Policy
    Refunds are only offered for defective products reported within 7 days upon receipt
    Buyers need to return the defective item for the replacement at his own cost. Item must be returned by registered airmail to our requested address.
    We do our best to serve each and every customer the best we can.
    if you need more items,we can provide you a wholesales price,you can contact us by message or email.