COBRA Truck Super Tough Urethane Bed Liner Spray On BLACK Coating Paint x2

Description

COBRA
BLACK
Truck Bedliner Kit
2
x 600ml+
2
x 200ml
hardener
COBRA
CLEAR
Truck Bedliner - 2K polyurethane resin-based textured protective coat. Extreme mechanical strength, scratch and solvent resistance.
Protects against adverse weather conditions, petrol, oil, water and salt.
Sound-proofing and sound-dampening properties.
Anti-slip finish.
COBRA Truck Bedliner guarantees
Superior protection
Stain and scratch-resistant coating finish
Durability in all weather conditions: water-resistant, extreme temperatures, UV radiation and sea water
ADD – SHAKE – SPRAY: fast and easy to apply
Adjustable texture thickness
Sound-proofing for improved driving comfort
Compatibility with various substrates
Impacting visual finish
COBRA Truck Bedliner can produce various textures depending on the nozzle size and thinning proportions:
Coarse texture: adjustable by spraying pressure and the nozzle-to-surface distance; requires a UBS spray gun;
Medium texture: adjustable by adding thinner 0-5% and spraying with a con-ventional gun and a Ø 2,5 mm nozzle.
Fine texture (perfectly imitating plastic): when adding 25-30% thinner and applied with a conventional gun, nozzle diameter 1.4-1.8 mm.
The product can also be applied with brushes and rollers. Recommendations for substrate preparation
Remove all details not to be coated.
Degrease with a silicone remover.
Sand down with a sand grain suitable for the substrate (from P120 to P180).
Blow the substrate clean of all loose particles.
Degrease with a silicone remover.
Mask all surfaces not to be coated (including tapped holes and fixed details) with painter's tape and paper/plastic sheets.
Apply an anti-corrosive protection layer (an etching primer 2K or an epoxy primer 2K - sand down with a sand grain from P240 to P320); do not apply the protective coating on bare metal.
For plastics and poorly matted substrates: use an adhesion promoting agent.
If the product action on the substrate is uncertain, perform a thinner test: if the coating begins to dissolve after wiping with a cloth soaked in the thinner (1K), remove the coating.
With the anti-corrosive coatings cured and properly prepared (by matting, blowing off dust and degreasing according to the specifications), apply the COBRA coating according to its Technical Data Sheet.